The Dillon XL750 is a high-speed progressive reloading machine designed to load common rifle and handgun cartridges, from 17 Hornet though the common belted magnum cartridges in rifle, and 32 ACP through 500 S&W in handgun. Machine height from the bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed.
The XL750 comes with a lifetime warranty against manufacturing defects and normal wear and tear.
NOTE: NO DIES AND CONVERSION KIT ARE INCLUDED WITH THE LOADER. DIES AND CONVERSION KIT MUST BE ORDERED SEPARATELY.
CONFIGURATION NOTE: the XL750 does not support the combination of the Dillon 3-die set, a low powder check and a Mr. Bullet Feeder.
The basic XL 750 includes the following:
- 1 powder measure with standard large and small powder bars (small bar installed). The small bar throws from 2.1 to 15 grains of powder. The large bar throws from 15 to 55 grains of extruded powder or up to 60 grains of ball/spherical type powder.
- 1 primer system with large and small priming parts (appropriate size installed).
- 1 large and one small primer pick-up tube.
- Low Primer Alarm
- 1 loaded cartridge bin
- 1 toolhead
- 1 powder die
- 1 set of standard Allen wrenches
You will also need (at a minimum, but not included):
- Die set (dies are not included with the base unit)
- Conversion Kit
- Powder scale
- Reloading Handbook
- Dial caliper
- Primer flip tray
- Case lube (for bottleneck cartridges)
The XL750 is shown in the picture with the following options that are not included:
- Electric Casefeeder
- Roller Handle
- Strong Mount
- Bullet Tray
- Powdercheck Die
- Low Powder Sensor
- Die set
- Conversion Kit
Products from the same brand
Write Your Own Review