Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Hardware: Hex head screws and wrench provided
Center Spread: 4.485"
Overall Length: 7.064"
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
The middle spread is the distance between the two middle holes, center to center, on your receiver.
This mount is available in 0, 15 and 20 MOA. Please see our FAQ section for more information on action lengths and MOA.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite
|Action Length||Long Action|
|Minute Of Angle||15 MOA|