Language
Search
Our New Boutique Collection Is Here – Shop Now
In stock
ITEM #
FR-DIE-G-20-1
Forster - Die Part - Die Lock ring- Accu-Ring Cross Bolt
$20.99
The Accu-Ring is a sizing/seater die lock-ring which provides reference marks in increments of thousandths of an inch (0.001”).
Sizing die (primary use) – Designed mainly for sizing dies, the Accu-Ring helps you zero in on what you want the headspace length of your cases to be.
Seater die (secondary use) – The Accu-Ring also allows you to make fine adjustments to bullet seating depths.
Notice: The distance of 0.001” is the distance between a long and short reference mark as shown in Figure 1. This distance indicates the up or down adjustment of the die in the Co-Ax® Reloading Press. Actual up or down movement of the die is 0.000998” per reference mark, which, for all intents and purposes, is one thousandth of an inch (0.001”).
Pack of 1.
Improvement to Cross Bolt Die Lock Rings. A socket cap screw is now used to lock the ring in place. The improvement allows you to make fine adjustments without “pushing” on the ring as you are snugging it up. Fits any standard 7/8″ x 14 dies.
Forster Products has solved two problems common to many reloaders: misaligned die locking rings and damaged die threads. Either of those situations can occur when a locking ring cross-screw is fastened too tightly or if the locking ring threads are improperly mated with the die threads. Forster’s locking ring design features an easy to use cross bolt that connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die. The result is a more reliable alignment with no canting and no damage to the die threads which remain untouched by the cross bolt. Tightening or loosening the cross bolt requires a 7/64″ hex wrench. The Forster cross bolt locking ring will fit any manufacturer’s standard 7/8″ X 14 dies. They are supplied with all Forster’s high quality Bench Rest® Dies.
Products from the same brand
Write Your Own Review