Inline Fabrication - Flush Mount Quick Change Base Plate

The flush mount quick change system base plate is for the reloader who's bench serves many purposes. Enjoy a clear, flat work space when you want it, but in only 30 seconds, you can mount a vise, case trimming tools or your favorite press and get to work. Heavy duty 3/16 & 1/4 thick steel construction can take anything you can throw at it.

Swapping out presses/tools takes less than 30 seconds and requires no tools.

This plate is made to be routed into your bench to create a nice, flat unobstructed workspace. It also allows folks to use the quick change system, with-out adding any height to their equipment, user ergonomics or to avoid overhead cabinets, etc. The plate is 8"x8" square and overhangs the bench face 1 1/2". Also, It can be mounted flat to your benchtop if you don't want to route it in flush.

Note: The leg in the photo does not come with the kit, it is the leg to the bench.

Note2: Required routed out depth is exactly 7\16" deep.

!!Required!! Quick change top plates . Each reloading press or piece of equipment you want to use with the quick change set up, needs its own top plate.