In stock
SKU
LEE-90932

LEE TURRET PRESS 4-HOLE AUTO INDEX

$141.99

Products from the same brand

  1. LEE PISTOL DECAPPER
    LEE PISTOL DECAPPER LEE-90027
    Lee
    $2.99
  2. LEE 9.3x62 CASE LENGTH GAUGE & SHELLHOLDER
    LEE 9.3x62 CASE LENGTH GAUGE & SHELLHOLDER LEE-80221
    Lee
    $7.49
  3. LEE S/H #R14: 38-40 WIN/ 44-40 WIN/ 460 S&W
    LEE S/H #R14: 38-40 WIN/ 44-40 WIN/ 460 S&W LEE-90001
    Lee
    $6.49
Proven design with compound leverage. No spring in this turret design. The turret is locked into a solid steel ring with big rifle bolt type lugs. Patented design puts the lugs on the circumference so there can be no tipping. The linkage is so powerful that the largest magnum cases are sized with ease. Effort required is so small that the usual heavy bench is not essential. The Lee Turret Press has built-in primer catcher, longer stroke, more hand clearance and a comfortable new foam grip. Even if you do not need all of these features, why pay more for anything less? In fact, you will want a Lee Turret Press even if you already own a more expensive one. The forth hole in the turret allows you to install your Lee Factory Crimp Die or taper crimp die in the press. The auto index on the press is capable of loading cartridges with an overall length of 2.313" or less. Our Classic Turret Press also has the auto index feature, and is capable of loading cartridges with an overall length of 3.313" or less. For both presses anything longer than the above specs, would require the turret to be manually advanced. Note: If you are using the Auto-Disk Powder Measure on this press, the Auto Disk Riser will need to be purchased to provide adequate clearance for the Lee Safety Prime. Product image note: The 4 Hole Turret Press is pictured mounted on the Lee Bench Plate. This item is sold separately # 90251.
Write Your Own Review
You're reviewing:LEE TURRET PRESS 4-HOLE AUTO INDEX
Your Rating