Out of stock

TEMPILAQ 2 oz. 750° F.

  • Laboratory control, minimum cost.
  • For furnace or open flame hardening and tempering of steel parts.
  • Apply thin smear to surface to be treated.
  • When desired temperature is reached, Tempilaq melts sharply.
  • Disregard color changes, when Templiac melts, quench!

Optimal for cold and/or smooth surfaces, Tempilaq G® Indicating Liquid is a quick, easy and cost-effective method to verify the achievement of a specific temperature on a wide range of surfaces under dynamic conditions.

43 different temperature ratings from 175°F to 1900°F (79°C to 1038°C)
Reliably accurate – melts within ±1 percent of rated temperature
Easy to apply quick-drying fluid
Non-flammable for maximum safety and unrestricted shipment
Standard packaging: 2 oz bottles
Certification available upon request
Numbered production lot for traceability
Quick application and accurate results. When applied to a surface, Tempilaq quickly dries and forms a dull and opaque film. The film liquefies when heat is applied to that surface and the rated temperature is reached. As the surface cools, the liquefied Tempilaq re-solidifies to leave a distinctly different mark, confirming that the target temperature has indeed been achieved.

Write Your Own Review
You're reviewing:TEMPILAQ 2 oz. 750° F.
Your Rating